Skip to the content
Agoo Help

Open the Evacuation List at a Kiosk

See who's on site, tick people off and keep count in an emergency, with or without a network.

  • Plans: Every plan
  • Updated 5 November 2026
  • 3 min read
  1. Tap Evacuation. On a guard device it's one of the choices, and on the lock and sign-in screens. On any other kiosk it's at the bottom of the welcome screen.

  2. Type your own PIN and tap Open. Nobody's name shows before this. A guard on duty with the device unlocked goes straight in.
  3. If no roll call is running, press and hold Hold to Start the Evacuation for two seconds. If one is running, you join it.
  4. Tap a person's row when you've seen them. The large number at the top is how many are still to account for.
  5. Type a name in Find someone by name to find anyone quickly. Someone who works here but isn't listed shows under Not on the List.

  6. Confirm each person under Away, Not Expected Here when you've reached them.
  7. When it's over, tap End the Evacuation.

Good to Know

  • It works with no network. Ticks are kept on the kiosk with their time and your name, and sent when it's back. If several kiosks or Agoo Workspace mark the same person, the latest mark stands.
  • The line under the number says how old the list is. People who came or went since then aren't reflected.
  • People clocked in away aren't counted. They're listed so that nobody is forgotten.
  • People who don't clock in aren't on the list until you add them, so find them by name.
  • Tap a ticked row to take the tick back.
  • Every tick is kept for a year on every plan, Free included, with the name, the time and who ticked. Whoever reads your audit trail finds them in ConsoleSecurityRoll Call, under Evacuation Record.
  • Everyone with a site-security role and a PIN can open it, and so can anyone marked as working the gate. The device PIN opens it too, and then ticks name the kiosk rather than a person.
  • Only someone whose role may send alerts causes the "I'm safe" messages, and only if the kiosk reaches Agoo within half an hour. Staff can set a PIN in Agoo WorkspaceMeBadge and PIN.
  • The list closes when someone leaves it for five minutes or puts the app away, and a PIN opens it again.
  • A kiosk in a computer's browser has no offline list. Use the app where the network drops.
  • The list and its ticks work on every plan, and every tick is in your audit trail. On Free, holding to start opens the list on the kiosk and sends no alerts. Starting a full roll call, with alerts, comes with Starter and above.

If Something Goes Wrong

  • It says the kiosk hasn't got its list yet. It has never connected, so it knows nothing about who's here. Use your paper register, or Agoo Workspace or the Console if you have a signal.
  • It says the list is too old to trust. The kiosk hasn't reached Agoo for over a week, so it hides names. Use your paper register.
  • It says your PIN is wrong, or too many wrong PINs. Tap Use the Device PIN, which also lets people use their own PINs again.
  • It says nobody can open the list here yet. An Admin sets a device PIN in ConsoleDevices, or someone with a site-security role sets their PIN.
  • There's no End button. Only someone who runs roll calls can end one started elsewhere: in the Console, in Agoo Workspace, or here with their own PIN.

Was this helpful?

Still Stuck?

Ask in your own words. If it needs a person, we'll bring one in.